DOUBLE CONE VACUUM DRYING UNIT

This series of products is one of the equipments that be researched and developed and been transferred by Shanghai Medical Industry Institute, mainly applicable for drying all kinds of granular materials, such as antibiotics, crystal, in the pharmaceutical, chemical and other industries.

Main characteristic:

1.The cone angle is designed as 60° which prevents materials from pilling during rotary process, and avoids powder retention during discharging.
2.The special design of vacuum pipes and vacuum filter increase the loading coefficient, which can even reach 65%.
3.The device includes three layers. The parts touching with materials can be made from SS304, SS316L, Ti, Hastelloy, PTFE lined or other materials. Jacket in the middle is for hot water circulation. To prevent stainless steel and carbon steel from producing static corrosion, the jacket must be made from stainless steel, and the outer layer uses fiberglass cotton for heat preservation.
3.High concentric degree of two shafts: less than 12um for 1000L or below, less than 16um for 1000L to 3000L, less than 25um for 3500L to 5000L.
4.Good stability: The whole frame is welded together with channel steel and carbon steel, outside covered with stainless steel plates. 
5.Good sealing performance: concentric degree of shaft are controlled well, both ends use mechanical seal.
6.Good rigidity: Both ends of the cone are welded together with the cone vessel as a whole. It is not easy to be deformed.
7.Steady transmission: The whole unit is driven by the electrical motor, reducer, big and small gears, which enables the unit run more stably and reliably.
8.Mounted with CIP and SIP device.
9.Design with SIP, CIP dedicated device.

TECHNICAL PARAMETERS

Specification（L）	Capacity	Drive power	Rotate speed	Host weight	Diathermanous area of condensator（㎡）
20L	≤10	0.55	6	300	3
50L	≤25	0.55	6	450	3
100L	≤50	0.75	6	820	3
200L	≤100	1.1	8	1050	3
300L	≤150	1.1	5	1219	7
500L	≤250	2.2	4	1674	7
750L	≤370	2.2	3.5	1995	7
1000L	≤500	7.5	4	3073	10
1200L	≤600	7.5	4	3137	12
1400L	≤700	7.5	4	3238	14
1600L	≤800	7.5	4	3359	16
2000L	≤1000	7.5	4	3570	20
2500L	≤1250	7.5	4	4065	25
3000L	≤1500	7.5	4	4565	30
3500L	≤1750	11	4	7835	35
5000L	≤2500	11	3.2	8347	50
6300L	≤3150	15	3.2	9580	70
7000L	≤3600	18.5	3.2	11500	70
8000L	≤4000	22	2.2	12800	80
10000L	≤5000	22	2.2	13900	100
12000L	≤6000	22	2.2	14800	120
14000L	≤7000	30	2.2	16200	140
16000L	≤8000	30	2.2	18700	180
18000L	≤9000	30	2.2	20150	200