THREE-IN-ONE EQUIPMENT

The filtering, washing and drying " Three in One" equipment can be made from SS304, SS316L, Ti, Hastelloy, PTFE lined or other materials. It can replace the filtering and drying equipments at the same time (such as: vacuum filter, pressure filter, Double-cone Drying machine and drying box...etc.). It completes the whole process of filtering, washing, drying, solid discharging in the same equipment. It is widely applied in the industries, such as pharmaceutical, chemical engineering, agrochemical, food, etc. It is the most ideal equipment for filtering and drying. What’s more, it can realize the continuous operation without air, and even more suitable for producing sterile and poisonous products.

Filter stage: the separation of filter cake and mother liquid. The thickness of filter cake can reach 500 mm.
Washing stage: further purification of filter cake, rinse and dehydration of mother liquid remained. Mix the lotion and the filter cake via up and down of agitator by layers to make the filter cake slurry finally, then the filter cake can get the full wash.

Drying stage: Dehydrating and drying the filter cake. Agitator will scrape filter cake loose by layers while the sidewall; the bottom of filter plate and agitator will heat the filter cake at the same time. Moreover, The vacuum inside the equipment will accelerate the evaporating speed; the entered hot nitrogen will take away the damp and accelerate the speed of desiccation.

Bottom plate structure: 
Main material: SUS304L or 316L
Material of filter plate: sintered plate、Wei Qisi network or filter cloth (from 5 um to 50 um according to the requirements of clients) 
Dead angle of filter cloth: 25mm single side
Flatness degree of single plate: ±1mm/m
A: The fixed bottom plate is welded on the vessel and has heating system for heating and drying. 
B: The removable bottom plate:  clipping the two pieces of flanges with clamps in order to seal completely. The bottom plate can be removed and landed by hydraulic cylinder. Special C-shaped bolts or quick opening clamp can be used to lock the bottom plate and barrel tightly. There are wheels under the bottom plate to help to wash filtering board. The bottom plate has the heating system with two types: flowing heating and pipe heating. The filter plate is fixed with stud bolts under the bottom plate, which makes filter plate balanced. There is no stud bolt in the part of connecting with product. 
Discharging section: The dried materials are automatically discharged from the side discharging vent under the reverse rotation by the S type mixing blade and enter into packaging directly.


A.Stir through clockwise and anticlockwise rotation：
1.The agitator shaft is driven by gearbox and motor. And inverter can adjust the rotating speed.
2.The rotation, up and down of the agitator are driven by Hydraulic system and regulating valve controls the speed. Stir up and down. Up and down of the bottom is also driven by Hydraulic system. The pump can be controlled by hand or by electric or by pneumatic.
B.Reducer uses domestic or imported products
C.Rotation speed: be controlled in the range of 1-15 rpm/min by inverter, containing a safety device.

Main features：
A.Economical energy: The electrical engineering power is small (big speed ratio of Gear Box: I = 46.3)
B.CIP and SIP; sterile by steam (122℃)
C.Double-line 0-rings for seal between bottom plate and vessel, no dead angle, "GMP" designs are suitable for sterilizing and cleaning, attaining an ideal sealing effect.
D.Reduce the labor strength of operators, and avoid the pollution of the product, meeting "GMP" request

Product Specification

Product specification	Capacity（m³）	Filter area（㎡）	Travel route of the mix blend（mm）	Electrical motor power（KW）
φ800	0.6	0.5	250	4
φ1000	1.2	0.8	300	5.5
φ1200	1.5	1	300	5.5
φ1400	2.2	1.5	400	7.5
φ1600	3	2	400	7.5
φ1800	3.5	2.5	400	11
φ2000	4	3	400	11
φ2300	5.7	4	400	15
φ2400	6	4.5	450	15
φ2800	9.5	6	450	18.5
φ3000	10.2	7	500	22
φ3200	12	8	550	30
φ3600	18	10	550	45
φ4000	22	13	550	45
φ4200	25	14	550	55
φ4600	30	16	550	75