Original
The company profile was verified by 
This dryer is specially designed for latex, suspending liquid, mash, liquor etc, especially in polymer and colophony; dyestuff, paint; porcelain, glass; deruster, helminthic; carbohydrate, dairy products, scour; compound fertilizer, organic compound, inorganic compound and so on. Features
1) Rapid dry, only takes 5-15 seconds.
2) The materials completes process of fully dry in a short time, that suits for the heat sensitive materials.
3) Simplify the production process, easily operation.
4) The finished products is of good dispensability, fluidity. Working Method The air passes through air filter and heater to air distributor on the top of dryer. Hot air flows into dryer smoothly in a spiral way. The material are driven to the centrifugal sprayer in the top of dryer by pump. Hot air and material mixes with each other. Moisture evaporates rapidly. And material becomes dry in a short time and takes out through cyclone separator. Technical Data
工艺流程简图
Technical Data
| Model | 5 | 25 | 50 | 150 | 200-2000 |
| Outlet temp | 140-350(Self control) | ||||
| Outlet temp | 80-90 | ||||
| Max moisture evaporated | 5 | 25 | 50 | 150 | 200-2000 |
| Transmitting form of spray head | Driven by compressed air | (Mechanical drive) | |||
| Max revolving speed | 25000 | 18000 | 18000 | 16000 | 8000-15000 |
| Dia of spray plate | 50 | 120 | 120 | 150 | 180-240 |
| Heat source | Electricity | Steam +electricity9 | Steam & electricity, fuel, gas and hot air oven | ||
| Max power of electrical heating | 9 | 36 | 72 | 99 | |
| (m) | 4×2.7 ×4.5 | 7×5.5 ×7.2 | Decided according to real situation | ||
| Dry starch collected | ≥95 | ||||
